• lukstru@lemmy.world
    link
    fedilink
    arrow-up
    90
    ·
    3 months ago

    I recently held a science slam about this topic! It’s a mix of the first computer scientists being mathematicians, who love their abbreviations, and limited screen size, memory and file size. It’s a trend in computing that has been well justified in the past, but has been making it harder for people to work together. And the need to use abbreviations has completely gone with the age of auto completion and language servers.

    • Ephera@lemmy.ml
      link
      fedilink
      arrow-up
      67
      arrow-down
      6
      ·
      3 months ago

      mathematicians, who love their abbreviations

      Man, I hate that so much. I swear this was half the reason I struggled with maths and physics, that these guys need to write this:

      Rather than this:

      At some point, they even collectively decided that not having to write a multiplication dot is more important than being able to use more than a single letter for your variables. Just what the fuck?

      • MisterFrog@lemmy.world
        link
        fedilink
        arrow-up
        38
        ·
        3 months ago

        Thing is, you usually define all your variables. At least we do in engineering (of physical variety, rather than software).

        Mostly because we can’t expect everyone reading the calculation to know, and that not everyone uses the same symbols.

        Not explaining each variable is bad practice, other than for very simple things. (I do expect everyone and their dog reading a process eng calc to know PV=nRT, at a minimum).

        Just like (in my opinion) not defining industry specific abbreviations is also bad practice.

        Mathematicians don’t do this? Shame on them.

        • Ephera@lemmy.ml
          link
          fedilink
          arrow-up
          11
          arrow-down
          1
          ·
          3 months ago

          I mean, it was rather physics that was worse in this regard.

          Mathematicians do define their variable quite rigorously. Everything is so abstract, at some point you do just need to write down “this thing is a number”. Problem with maths folks is rather that they get more creative with their other symbols. So, “this thing is a number” is actually written as “∃x, x ∈ ℝ”.

          But yeah, in the school/university physics I experienced, it was assumed that you knew that U is voltage, ρ (rho) is density, ω (omega) is angular velocity etc…
          At one point, I had to memorize six pages of formulas and it felt like every letter (Latin, Greek, uppercase, lowercase, some Fraktur for good measure) was a shorthand for something.

          • MisterFrog@lemmy.world
            link
            fedilink
            arrow-up
            3
            ·
            3 months ago

            I should specify when I say physical engineering I just mean chemical, mechanical, electrical, etc. (not software), rather than physics in theory/academia.

            I guess engineers are applied physics (in a particular area each), and we need to distribute our deliverables to people who aren’t necessarily experts in every discipline.

            It just also makes sense to always define variables.

            It’s so funny because I’ve never seen voltage defined as U, and not V haha, proving how if you’re going to have an equation, you’d better define everything, there’s so many reused letters!

            Thanks for sharing

            • barsoap@lemm.ee
              link
              fedilink
              arrow-up
              4
              ·
              3 months ago

              U is definitely standard for a difference in electric potential in Europe. Thought to come from “Unterschied”, difference. V refers to electric potential, which as wikipedia says so wisely, should not be confused with a difference in electric potential. Which North American notation does. At least it’s not PEMDAS…

              • MisterFrog@lemmy.world
                link
                fedilink
                arrow-up
                4
                ·
                3 months ago

                There ya go (only used it up until highschool physics, in Australia, iirc), I definitely have no business reading anything regarding voltage then 😅

                Thanks for sharing

        • MonkderVierte@lemmy.ml
          link
          fedilink
          arrow-up
          4
          ·
          3 months ago

          Still bad, i’m not a computer with a lookup table in memory.

          I do expect everyone and their dog reading a process eng calc to know PV=nRT, at a minimum

          What is “eng”?

          • MisterFrog@lemmy.world
            link
            fedilink
            arrow-up
            5
            ·
            edit-2
            3 months ago

            Lol fair point regarding Eng: “Engineering”.

            But Nah, I think assumed knowledge of PV=nRT is fair in context, since if you don’t know what it is, you’ll only be reading the conclusion, not getting into the weeds of a calculation document.

            I’m not going even going to be explaining if I have a column that’s says volumetric flow rate, with V=m/ρ. If I give mass flow rate and density (with units, of course), and use these extremely common symbols, and someone doesn’t understand, then they have no real business getting to this level of detail anyway.

            I do agree that in most cases not defining your variables is bad practice, but there is some nuance, depending on the intended audience and how common a formula is, and the format of whatever it is you’re writing.

            • lad@programming.dev
              link
              fedilink
              English
              arrow-up
              1
              arrow-down
              1
              ·
              edit-2
              3 months ago

              So, in the end you just do assume everyone to know the “common sense” one-letter notation for everything. Well, not everything, but the essential ten thousands of entities for sure /s

              This sounds like No true Scotsman fallacy to me

              I find it a bit contradicting to the very point you made about defining variables. If anything, one might be some home-grown genius that has real business getting into details but only ever used Chinese characters as variables

              Edit: forgot to set language

              • MisterFrog@lemmy.world
                link
                fedilink
                arrow-up
                2
                ·
                3 months ago

                Understand your frustration with how I’ve communicated my position, sorry about that:

                My justification for the examples I’ve given is there still needs to be other context, is based on complexity of the equation, and the intended audience of that equation.

                An example of me not explaining a very simple equation would be perhaps a table of various cases:

                | — | mass flow (kg/hr) | density (kg/m³) | Volumetric flow (m³/hr), V = m/ρ | | Case 1 | blah blah | blah blah | blah | | Etc. | … | … | … |

                Realising now that markdown tables don’t seem to work 😅, hopefully this is still clear.

                It may be a touch better to put variable symbols in the other columns, but:

                1. You still have the final answer (the purpose of my report, I’m not writing a thesis here)
                2. It should be plainly obvious by the units, and the fact those are the previous two variables, to someone who has the ability to understand (and is the intended audience of that little equation)

                As a recent example for this, in a data sheet I recently prepared, I literally just put a * in the references column and said “*calculated from other data sheet values” for the volumetric flow rate, because the intended audience would know how to do that, and the purpose was for me to communicate how that value was determined.

                Me putting in the V = m/ρ in the hypothetical example I gave above is a just a little mind jog for the reader.

                Where more complicated equations are used, of course these are properly referenced, usually even with the standard or book it’s come from.

                I’ll redefine my position to: Clearly define all variables, unless it’s abundantly obvious to your intended audience from context.

                My intended audience of the conclusions or final values are the layman. My intended audience of everything else is someone with a very basic chemical engineering understanding.

                Your last point is a strawman:

                I find it a bit contradicting to the very point you made about defining variables. If anything, one might be some home-grown genius that has real business getting into details but only ever used Chinese characters as variables

                Because I’m writing in English, for an English speaking audience, and there is no such thing as a home-grown genius getting into my area because it’s a legal requirement that they have an honours degree. Even still, the two assumed knowledge equations I mentioned, which I would only not reference with sufficient context, would STILL be recognisable with totally random symbols.

                | mass flow (kg/hr) | density (kg/m³) | Volumetric flow (m³/hr), 容 = 质/密 | Yup, a bit odd in an English context, but with the units information (always mandatory, of course) completely understandable.

                • lad@programming.dev
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  3 months ago

                  First of all, thank you for a thoughtful response, I was too snarky, sorry about that.

                  TL;DR: guess I’m just upset that there is no objective way of measuring how much knowledge is required, and trying to read everything from sources list would take forever.

                  Yeah, the last point is sort of a strawman, although I meant it not to highlight that explanations should be given in terms that the reader is used to, but rather that the reader may have quite arbitrary amount of prior knowledge.

                  I agree that there probably should be some shared context, what bugs me is that people tend to vary a lot in what amount of context is considered to be required. And more than once have I met papers that require deciphering even if you have some context and kind of come from the field they are written for. I used to think that this is our of malice to make reproducing their work harder for others, but maybe it was just an assumption of much larger shared context.

                  Tables markdown work in some clients, afaik, but I don’t remember which, and even if I saw it or imagined it

                  • MisterFrog@lemmy.world
                    link
                    fedilink
                    arrow-up
                    2
                    ·
                    3 months ago

                    No worries friend, no hard feelings and appreciate the engagement!

                    Yeah, agree it is a bit wishy washy in terms of gauging how much explanation to include ¯_(ツ)_/¯

                    I suppose (in my opinion) the mindset should be: include as much explanation as possible, without it being cumbersome.

                    I personally err on the side of over-explanation and have had some senior engineers give me feedback that it’s too much. Still learning for myself how much is too much.

                    Totally agree though, that there are many cases where people leave things out as assumed, when it’s not really reasonable to do so.

                    A side-thought on specificity: one of my biggest pet peeves is when people list pressure with the units of kPa, when they really mean kPag. In industry, you are rarely talking in absolute pressure (other than for pressure differences) and people then get lazy/don’t know/assume it’s fine to do something like: set point 100 kPa (when they mean 100 kPag). It isn’t fine though, because at lower pressures atmosphere counts for a pretty large percentage of the absolute value.

          • MisterFrog@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            3 months ago

            (Pressure) * (volume) = (# moles) * (gas constant) * (temperature)

            The ideal gas law.

            In another thread I admit I didn’t explain my position here well enough. I would only not explain this equation given sufficient context (e.g. I’ve shown all those variables in a table, and my intended audience is people familiar with basic chemistry, which I’d expect would be everyone reading the report for this particular example, since this is high school chemistry, and the topic of all reports I work on is chemical engineering.)

            People can read the conclusions if they’re not familiar with chemistry, and for the detail, they’re not my intended audience anyway.

            Generally I still hold the position that you should define variables as much as possible, unless it’s overly cumbersome, given your intended audience would clearly understand anyway.

            In context this simple equation is obvious even if you change the symbols, as long as there is sufficient context to draw from.

      • blind3rdeye@lemm.ee
        link
        fedilink
        arrow-up
        16
        ·
        3 months ago

        Using full names like that might be fine for explaining a physical rule, or stating the final result of some calculation - but it certainly would be cumbersome and difficult for actually carrying out the calculations. In many cases we already fill pages with algebra showing how things can be related and rearranged to arrive at new results. That kind of work would be intractable with full word names for the variables, partially because you’d be constantly spilling off the end of the page trying to write the steps; but also because having all that stuff would actually obfuscate what you are trying to do - which is algebra. And during that process, the meanings and values of the pronumerals is not as important has how they interact with each other. So the names are just a distraction.

        For setting up an equation, and for stating the final result, the meanings of the variables are very important; but during the process of manipulating the equations to get the result you want the meanings of the letters are often ignored. You only need to know that it is something that can be multiplied, or inverted, or subtracted, or whatever. Eg. suppose I want to rearrange to get the velocity. I don’t care that I’m dividing both sides by the air density times the drag coefficient and the area… I’m just dividing ρCA, which is an algebraic blob whose interpretation can be saved for some other time.

        • hydroptic@sopuli.xyz
          link
          fedilink
          arrow-up
          3
          arrow-down
          2
          ·
          3 months ago

          This is absolutely true, but it still seems to me that we’re throwing the baby out with the bath water when we just stick to extremely terse symbols for everything regardless of context.

          Reading articles would be so much easier if they used even slightly longer names – thankfully more and more computer science articles do tend to use more human readable naming nowadays, at least.

          Sure, longer names make manipulation harder a bit more annoying if you’re doing it by hand, but if you do need to manipulate something you can then abbreviate the terms (and I’m 60% sure I’ve seen some papers that had both a longer form and a shorter form for terms, so one for explaining shit and one for the fiddly formal stuff)

          Of course using terse terms is totally fine when it’s clear from the context what eg. ∆x means.

      • trolololol@lemmy.world
        link
        fedilink
        arrow-up
        12
        ·
        3 months ago

        Try to write the above with pen and ink and then tell me if you can read it back yourself.

        Single letters is not a good system but it was the less bad one.

        • lukstru@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          3 months ago

          Yep, that’s what it usually boils down to. However, I think a slight approach shift for basic materials could be useful, where introductory books / papers / … write out formulas. That makes it easier to understand the basic concepts before moving onto the more complex stuff. It should be easy to create such works, as they are usually created digitally, and autocomplete is available. Students can and will abbreviate those written outs words by themselves (after all, writing is annoying), but IMO reading comprehension is the key part that can be improved.

          Also, when doing long formulas that you want to eliminate members of, writing stuff out can be a nightmare.

          • mexicancartel@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            17
            arrow-down
            1
            ·
            3 months ago

            Bruh how large should our notebook pages be? Also how should we speak about the equation? What if the terms should be represented in a matrix? What if mathematical functions e^x, sin, ln etc. are present? Would you write sine of e^(velocity of the particle B) ? Notations are necessary for readability

            • Ephera@lemmy.ml
              link
              fedilink
              arrow-up
              9
              arrow-down
              3
              ·
              3 months ago

              I don’t know what to tell you. They obliterate readability for me.
              I also genuinely believe these shorthands hinder access to research for the 99.9% of humanity who are not experts in the given field. Obviously, you do need to understand the context to use a formula correctly, but that also becomes harder when everything is written with hieroglyphs.
              In university, I had to assess this paper. It took me 3 weeks to decipher that alien language, and it doesn’t even say anything particularly riveting.

              To address your points:

              • I’m hoping that at least published math can be typed out with full names.
              • I’m not opposed to local aliases. E.g. if the point is that some values in the matrix are negative and others not, then absolutely write “with air_resistance as ‘a’, the catapultation matrix is { a, -a, -a, … }”.
              • I don’t actually want to introduce spaces into variable names, that’s just an example I randomly found online. I was rather thinking e.g. sine(euler^velocity_b).
                Bonus point: You can reasonably type it on a computer, because you don’t need Greek letters and subscripts anymore.
              • mexicancartel@lemmy.dbzer0.com
                link
                fedilink
                English
                arrow-up
                2
                ·
                3 months ago

                Btw i am all for local aliases. I see them most of the times.

                i.e, [equation], where a = area of the surface, v= velocity,…

                But without short codes it would be a pain to write and remember. Some of the shortening like del operator really reallh simplifies the original expression with better showcase of physical meaning, but looks alien to people who don’t know. But we can’t stop using it since it makes everything else difficult for people in that area

            • MisterFrog@lemmy.world
              link
              fedilink
              arrow-up
              4
              ·
              3 months ago

              You only have to define it once in a document, book, whatever. Also, it’s not like you’d ever need to do this for handwritten notes, only for a wider audience, or if you intend for something to be read by not just you.

              No one is suggesting you don’t use symbols, just that you define them, and not assume the reader uses the same symbols as you. Which, so often, they don’t. (How many different ones have you come across just in highschool and uni. I came across multiple)

              I’m no physicist, but surely there is a huge range of symbols for the same thing, especially the more niche you get.

              • littlewonder@lemmy.world
                link
                fedilink
                arrow-up
                3
                ·
                edit-2
                3 months ago

                I’m not a mathematician, but I agree with you because this is precisely how one would abbreviate repeating terms in a paper (e.g. The Museum of Modern Art (MoMA) and the Metropolitan Museum of Art (The Met) are both located in New York, New York (colloquially, New York City, or NYC). While MoMA has an art collection of about 200,000 pieces, The Met houses 1.5 million works of art.)

            • reinei@lemmy.world
              link
              fedilink
              arrow-up
              1
              ·
              3 months ago

              Welcome to Greece! No, not our modern Greece, the old timey write philosophical questions into the dirt with sticks and argue with your best homies about it kind of Greece!

              Want to compute something? Hope you got all your steps in linear order so you don’t have to remember too much in between other steps!

              /s (but not really so I totally am on your side, original formulations of math problems are a pain…)

        • TheGalacticVoid@lemm.ee
          link
          fedilink
          arrow-up
          3
          arrow-down
          2
          ·
          edit-2
          3 months ago

          What OP is talking about is readability, so in a situation where you’re taking your own notes and have your own set of defined symbols, full words aren’t necessary.

          I personally lost all interest in math because there are way too many opinionated or non-standard symbol definitions

          • Sodium_nitride@lemmygrad.ml
            link
            fedilink
            arrow-up
            5
            ·
            3 months ago

            I personally lost all interest in math because there are way too many opinionated or non-standard symbol definitions

            That seems like a strange reason to quit math since most symbols are pretty well agreed upon, and maths has little to do with the actual notation either way.

            • TheGalacticVoid@lemm.ee
              link
              fedilink
              arrow-up
              2
              arrow-down
              1
              ·
              3 months ago

              I should’ve said “anything math-heavy,” but even then, it seems like switching fields or applications of math requires understanding a new definition of the same symbols, and a lot of that could be avoided with words.

              • Sodium_nitride@lemmygrad.ml
                link
                fedilink
                arrow-up
                2
                ·
                3 months ago

                I mean, if you get into any real depth with math, you are going to reach a point where you can’t use conveniently use words to describe the symbols being manipulated.

                As an example for the math I am doing literally right now, I very much prefer using C+R compared to “semi circular arc in the upper half of the complex plane with radius R”, or M+(f(z)) which means “Maximum of the magnitude of the function f(z) over C+R”, which if I were to write out in full, would just become a clusterfuck.

                Also you still wouldn’t be able to get rid of symbols because some symbols are placeholders and straight up don’t have any meaning in natural language. This occurs often in physics as well, not just pure maths. For example, the laplace transform of any function is written as a variable of “s”, but “s” doesn’t have a clear meaning (at least as far as I know).

      • xigoi@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        4
        ·
        edit-2
        3 months ago

        Try writing 20 algebraic manipulations of the equation on paper and you’ll quickly understand why it’s written that way.

      • WldFyre@lemm.ee
        link
        fedilink
        arrow-up
        5
        arrow-down
        3
        ·
        3 months ago

        The bottom is absolutely not more readable, and it’s much more difficult to work with.

    • papabobolious@feddit.nu
      link
      fedilink
      arrow-up
      1
      ·
      3 months ago

      It’s been really holding me back in learning coding. I felt pretty comfortable at first learning javascript, but as I got further the code was increasingly hard to look back to and understand, to the point I had to spend a lot of time understanding my own code.

      Does it truely matter after the code has been compiled if it has more full words or not?

      • lukstru@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        3 months ago

        It matters as soon as a requirement change comes in and you have to change something. Writing a dirty ass incomprehensible, but working piece of code is ok, as long as no one touches it again.

        But as soon as code has to be reworked, worked on together by multiple people, or you just want to understand what you did 2 weeks earlier, code readability becomes important.

        I like Uncle Bobs Clean Code (with a grain of salt) for a general idea of what such an approach to make code readable could look like. However, it is controversial and if overdone, can achieve the opposite. I like it as a starting point though.