It’s been clearing out at 2,5 °C for over 24 hours already, so I couldn’t wait any longer and took a little sampling. And it’s a-lovely :D

This is pretty much a classic stout, but with Viking Malt’s Sahti malt for the majority of the grist. The void-ness comes from Viking Malt’s Black malt (1300 - 1500 EBC). Some leftovers of Tuoppi caramel rye malt and a calculated dose of Simpson’s Premium English caramalt also went in. The rye in particular is keen to hijack the taste profile, bringing in the taste of Finnish classic ‘kotikalja’, a non-fermented malt beverage. That one is kept in it’s place, but I do regret not using a bit more of the English caramalt.

The yeast used was the fresh yeast that’s a hallmark of the sahti style. It gives a banana-like flavour, and I’ve found it can be controlled to a great extent by adjusting fermentation temperature. This one was set to 16,5 °C. Around 14 °C the banana aroma tends to get overpowered by fruity hops. Pressurised fermentation at 0,8 bar as always.

I made this batch to use up some leftovers, so I went with a pretty daring dosing of Moutere hop pellets for the first hop addition, followed up towards the end of the boil with Challenger. On this first tasting the Moutere is surprisingly subdued.

Plenty of time to run some xmas bottles for friends and family :) Cheers!

  • viking@infosec.pub
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    12 days ago

    Why would you lose anything? You can pour it straight from the test tube down your throat… And it really only takes like 50ml to begin with.

    • tasankovasara@sopuli.xyzOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      12 days ago

      Sounds like there are more compact floaters to be found… …I’ve picked up a vase that just fits my float and that would take 200 ml if not more.

      Personally I haven’t been that bothered with measuring my efficiency, but my old dad keeps pestering me to get some measurements done so he can finally decide if my stuff is ‘better’ (= stronger) than store bought :D

      • viking@infosec.pub
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        1
        ·
        11 days ago

        Haha I’ve only got a test set when I was making gin, since the raw alcohol has above 70° abv after distilling, so I needed to dilute it down with water to about 38-42° drinking strength, so had to be fairly accurate. Now I’m using the kit habitually for any brew.