Hello everyone, I recently bought a piantor keyboard and I am having trouble with qmk. I have configured two layer keys(num, nav) each of them switches to different layer and I want to be able to hold both of them to access fourth layer(CzechLayer), but I can’t seem to figure out how to do it. Here is my keymap.c file:

#include QMK_KEYBOARD_H
#include "keymap_czech.h"

enum layers {
    DefaultLayer,
    NumLayer,
    NavLayer,
    CzechLayer,
};

const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [DefaultLayer] = LAYOUT_split_3x6_3(
        KC_PIPE, KC_Q,         KC_W,         KC_E,         KC_R,         KC_T,          KC_Y,    KC_U,         KC_I,         KC_O,         KC_P,            KC_PPLS,
        KC_ESC,  GUI_T(KC_A),  ALT_T(KC_S),  CTL_T(KC_D),  LSFT_T(KC_F), KC_G,          KC_H,    RSFT_T(KC_J), CTL_T(KC_K),  ALT_T(KC_L),  GUI_T(KC_SCLN),  KC_PEQL,
        KC_UNDS, KC_Z,         KC_X,         KC_C,         KC_V,         KC_B,          KC_N,    KC_M,         KC_COMM,      KC_DOT,       KC_SLSH,         KC_PMNS,

                                             MO(NumLayer), KC_TAB, KC_SPC,                  KC_BSPC,  KC_ENT,  MO(NavLayer)
    ),

    [NumLayer] = LAYOUT_split_3x6_3(
        KC_QUOT, KC_1,         KC_2,         KC_3,         KC_4,         KC_5,          KC_6,    KC_7,         KC_8,         KC_9,         KC_0,            KC_PPLS,
        KC_ESC,  KC_EXLM,      KC_AT,        KC_HASH,      KC_DLR,       KC_PERC,       KC_CIRC, KC_AMPR,      KC_ASTR,      KC_BSLS,      KC_COLN,         KC_PEQL,
        KC_DQUO, KC_TILD,      KC_LABK,      KC_LCBR,      KC_LBRC,      KC_LPRN,       KC_RPRN, KC_RBRC,      KC_RCBR,      KC_RABK,      KC_QUES,         KC_PMNS,

                                             MO(NumLayer), KC_TAB, KC_SPC,                  KC_BSPC,  KC_ENT,  MO(NavLayer)
    ),

    [NavLayer] = LAYOUT_split_3x6_3(
        KC_BRIU, KC_F1,         KC_F2,        KC_F3,        KC_F4,        KC_F5,        KC_F6,   KC_F7,        KC_F8,        KC_F9,        KC_F10,          KC_VOLU,
        KC_ESC,  KC_F11,       _______,      _______,      _______,      _______,       KC_LEFT, KC_DOWN,      KC_UP,        KC_RIGHT,     KC_F12,          KC_MUTE,
        KC_BRID, _______,      _______,      _______,      _______,      QK_BOOT,       QK_MAKE, _______,      _______,      _______,      _______,         KC_VOLD,

                                             MO(NumLayer), KC_TAB, KC_SPC,                  KC_BSPC,  KC_ENT,  MO(NavLayer)
    ),

    [CzechLayer] = LAYOUT_split_3x6_3(
        KC_PIPE, _______,      CZ_EACU,      CZ_ECAR,      CZ_RCAR,      KC_T,          CZ_YACU, KC_U,         CZ_IACU,      KC_O,         _______,         KC_PMNS,
        KC_ESC,  CZ_AACU,      CZ_SCAR,      KC_D,         _______,      _______,       _______, _______,      _______,      _______,      KC_SCLN,         KC_PEQL,
        KC_UNDS, CZ_ZCAR,      _______,      CZ_CCAR,      _______,      _______,       KC_N,    _______,      KC_COMM,      KC_DOT,       KC_SLSH,         KC_PPLS,

                                             MO(NumLayer), KC_TAB, KC_SPC,                  KC_BSPC,  KC_ENT,  MO(NavLayer)
    ),
};
  • dreipunkteinsvier@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    In your num and nav layers you have to change the codes of the opposite layer tap keys. So in your num layer change MO(nav) to MO(chez) and for your num layer change MO(num) to MO(chez). So once you are in either layer hitting to other tap key takes you to your chez layer.