I did look into that. Trouble is I have brick walls and dont have an impact driver so I cant DIY it. Even bamboo blinds are going to need proper tool to install (plus its windy AF near gipsland so they dont last 2 years if I dont take them down over winter)
Saw that you own. I’m not an handyperson and have never done this but could you rent one and drill holes in the mortar, then tap in those little plastic plugs as anchors for screws?
I’ve seen that done for attaching house numbers to brickwork but the mortar was my own idea.
Mortar may be softer to drill into and easier to repair on mistakes or removal than the brick (someone else pipe up if this is a bad idea)
I did look into that. Trouble is I have brick walls and dont have an impact driver so I cant DIY it. Even bamboo blinds are going to need proper tool to install (plus its windy AF near gipsland so they dont last 2 years if I dont take them down over winter)
hmm, do you have a pic of the area above the window? If there’s gutters there has to be some sort of mount that can be used
Saw that you own. I’m not an handyperson and have never done this but could you rent one and drill holes in the mortar, then tap in those little plastic plugs as anchors for screws?
I’ve seen that done for attaching house numbers to brickwork but the mortar was my own idea.
Mortar may be softer to drill into and easier to repair on mistakes or removal than the brick (someone else pipe up if this is a bad idea)