• 0110010001100010@lemmy.world
    link
    fedilink
    English
    arrow-up
    107
    arrow-down
    1
    ·
    edit-2
    11 months ago

    There’s a very good reason my cameras stay internal only and are blocked 100% from the internet. I can access them via the NVR with a Wireguard tunnel when I’m away from home if need be.

    • BombOmOm@lemmy.world
      link
      fedilink
      English
      arrow-up
      32
      arrow-down
      1
      ·
      11 months ago

      Same here; LAN only with a VPN to get into the LAN. There is no reason to send my camera feeds to another party. All that can come from that is trouble.

        • BombOmOm@lemmy.world
          link
          fedilink
          English
          arrow-up
          7
          arrow-down
          1
          ·
          edit-2
          11 months ago

          Currently using BlueIris to read/record streams from Ubiquiti IP cameras* set to run in standalone mode. I chose that software since it is a one-time purchase rather than something monthly; and chose the cameras as they were fairly inexpensive when I bought them (5ish years ago) and they supported power over ethernet, which makes running cables to them so much easier (just have to run a single ethernet cable to them, don’t need to run a separate power cable).

          I’ll probably be redoing my setup in the future. Most notably swapping out BlueIris (Windows) for something Linux based as my trust in Microsoft has steadily declined.


          *I do enjoy the irony of these being mentioned given the thread we are in. I at least have them banned from talking to the internet.

    • Molecular0079@lemmy.world
      link
      fedilink
      English
      arrow-up
      29
      arrow-down
      1
      ·
      11 months ago

      I am still shocked that so many people are okay with cloud-based camera systems. It just seems like a security and privacy nightmare.

      Granted, setting up a DIY NAS to host a server and store footage is a whole technical challenge for most people, but still…

      • frezik@midwest.social
        link
        fedilink
        English
        arrow-up
        10
        ·
        11 months ago

        Thing is, Ubiquiti cameras aren’t cloud based. At least not to the same extent. The authentication system is cloud based, but the controller and storage is local.

        You can pay for several years of a cloud subscription for the cost of either a NAS or a Ubiquity storage server.

    • phx@lemmy.world
      link
      fedilink
      English
      arrow-up
      23
      ·
      11 months ago

      Ditto. “The Cloud” is just another name for somebody else’s computer which you don’t control

      • hillbicks@feddit.de
        link
        fedilink
        English
        arrow-up
        7
        ·
        11 months ago

        Reolink has always been a good choice. Very good hardware for the price and they support onvif on most devices, which you can then use however you like.

      • 0110010001100010@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        11 months ago

        Reolink, Ubiquiti, Dahua, Amcrest, and Wyze. Nice thing about a third-party NVR is you can mix and match whatever is cheapest or best for a given spot. I’m currently using iSpy Agent for the NVR as it’s runs nicely in docker. Then I layer Codeproject.AI over top for person detection rather than just generic motion alerts. I’m using a 2090 Ti GPU (which is WAY overkill but I got it for free) to make the AI detection very fast.

      • lemmylommy@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        11 months ago

        If you want cheap and good cameras: Some Annke cameras like the C800 are rebranded Hikvision models. Add a NVR like Frigate and you have a cheap and powerful local surveillance system.