Hello fellow selfhosters! I reformatted my USB hard drive from exFAT to XFS because I needed a filesystem that could handle hardlinks. I remounted the hard drive and now jellyfin webUI has a severe stuttering problem on some videos, all of them are MKV but it may be a coincidence. On android (using exoplayer) the same files works smoothly. what could be the problem?
in the logs I get a bunch of Slow HTTP Response from http://fedoraserver:8096/ to 192.168.1.30 in 0:00:07.4635856 with Status Code 200

OT: while looking at the logs this happened

SOLUTION: I enabled hardware acceleration, and manually selected also the HEVC and Allow encoding in HEVC format settings, and now the stutter disappeared! thanks to everyone for your help!!!

  • KptnAutismus@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    11 months ago

    not OC, but i ended up redownloading whatever was x265 and replacing it with 264 or anything else.

    also the 1060 in my NAS can do NVENC encoding. that helped a lot with compatibility.

    • MajorMajormajormajor@lemmy.ca
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      2
      ·
      11 months ago

      You can also use something like handbrake to convert everything to 264 instead of redownloading everything. You can also set it up to convert after items are downloaded.

      • lazynooblet
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        1
        ·
        11 months ago

        Does jellyfish not transcode on the fly?

        • Blackmist@feddit.uk
          link
          fedilink
          English
          arrow-up
          2
          ·
          11 months ago

          Yes, but if the server isn’t fast enough to do it, then you’re going to have a bad time.

        • AustralianSimon@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          11 months ago

          It can but it’s the server hardware that decides your performance, you can just avoid transcoder on the fly and have h264 mp4 and can run JF on a toaster smoothly.