Bumbling US cops who raided a medical diagnostics center thinking it was a cannabis farm got a gun stuck to the powerful magnets of an MRI machine, a California lawsuit has alleged.After bursting into the diagnostics center in October last year, the SWAT team found only offices, a single employee and medical devices, including a Magnetic Resonance Imaging (MRI) machine, a diagnostic tool that uses high-powered magnets to create detailed scans of a patient's body.

Bumbling US cops who raided a medical diagnostics center thinking it was a cannabis farm got a gun stuck to the powerful magnets of an MRI machine, a California lawsuit has alleged.

The owners of the facility are claiming damages against the Los Angeles Police Department for an operation their lawyers describe as “nothing short of a disorganized circus.”

Their lawsuit details how a SWAT team swarmed Noho Diagnostic Center after the squad’s leader persuaded a magistrate to issue a search warrant.

Officer Kenneth Franco drew on his “twelve hours of narcotics training” and discovered the facility was using more electricity than nearby stores, the lawsuit said.

“Officer Franco, therefore, concluded (the facility) was cultivating cannabis, disregarding the fact that it is a diagnostic facility utilizing an MRI machine, X-ray machine and other heavy medical equipment – unlike the surrounding businesses selling flowers, chocolates and children’s merchandise,” the suit said.

…

  • CaptainBasculin@lemmy.ml
    10·
    2 months ago

    While I knew these machines are really dangerous to bring metals to anywhere near it; it’s quite interesting to know that there is a fail safe for these cases.

    • Liz@midwest.socialEnglish
      201·
      2 months ago

      That’s not what a fail-safe is. A fail-safe is just what it says: the device fails into a safe configuration. In this case, someone has to press a button to quench the magnet, which is not really a failure mode of the machine.

      A typical fail-safe is something like a solenoid valve. The valve has a default position when no power is given to the solenoid, and you should design your machine so that the default position is safe (whether that be open or closed). The most likely failure mode is a power loss, so the configuration is said to be fail-safe.