Soon you will be able to brag about “fitting the whole gang in your bussy” !
20hp
737lb-ft torque
Sweet Jesus Christ.
That’s more torque than a lot of modern muscle cars have. I know electric motors can shit out a lot of torque, but holy fuck.
The ebussy needs a lot of thrust
Well yeah, it’s clearly a size queen. If you can’t compete with size, then you need deep, hard thrust.
That eBussy is demanding it.
Look at it.
I’d drive that eBussy all night long!
It’s like a farm tractor.
Top speed of around 100kph. Not that high, but it will get to that speed right the fuck now.
The Chevy Spark EV was something like 140hp but 330ft-lbs of torque. It was quite ridiculous and I know a lot of people who absolutely loved it.
It’s because the way we measure torque on electric motors doesn’t compare to the way we measure torque on ICE cars. A “muscle car” will be much, much stronger than these busses even though they claim “700 lb-ft” of torque.
Lb-Ft
FFS, just adopt the metric system already. And “lb” is not a force unit. Also don’t capitalize unit abbreviations unless named after scientists.
“pound foot” is the most intuitive name for a unit of force imaginable!
How much force? One pound of the foot. Easy!
Red Foreman agrees… “one pound of my foot in your ass”
It’s one pound per foot you moron!
/s
Not just any old foot, a square one
What do I do with my old foot then?
It’s a derived unit of torque. Pound is already a measure of force.
Of this, you and I, are quite aware.
The Joke, however, is in the air.
Better than “newton-meters” , yeesh. What the hell is a “newton”?
Actually, what the hell is a “meter”?
The mnemonic for remembering a newton is actually one of my favorites. It’s the force required to move 1kg by 1m. A kg being roughly the mass of an apple makes Newton a natural and somewhat clever fit for the concept.
What kind of monster apples are you eating??
Actually pounds are a unit of force
Pounds~newtons
Slugs~ kilograms
Pounds are a unit of money.
lbf(poundforce) is a misnomer, it’s actually the pressure required to stamp the King’s portrait into a £1 coin. Slightly changes with each monarch – or by a lot whenever they switch to cheaper materials because of devaluation. The frequent redefining of poundforce is now a major consequence of Brexit. /sFairly sure there isn’t any money with the king’s face on yet. So we’re still on the Elizabeth standard for now.
deleted by creator
It’s confusing, since “pound” is used for both force and mass.
1 lbm is roughly 0.45 kg
1 lbf is the force required to accelerate a 1 slug (32.2 lbm) mass 1 ft/s^2.
I know slugs are just snails without shells, but they don’t need to go faster
I don’t know what the imperial system standards committee was up to, but I’ve never met a slug that was 32.2 lbm
You wouldn’t know her, she goes to a different school.
lbm
What a brainfart of a unit is that?
Lb is force. Mass is Slug in imperial. https://en.wikipedia.org/wiki/Slug_(unit)
Mercifully, g=9.8 everywhere on Earth’s surface, so we use weight interchangeably with mass, but yes, we should weigh ourselves in Newton: “I need to lose 10kg, so I can reach my ideal weigh of 700N” :P
Mercifully, g=9.8 everywhere on Earth’s
Big nope. It depends not only on height, but also on density of stuff under ground.
I’d say it’s more of a “small yes” than a “big nope.”
While gravity does vary, it goes from about 9.76 to about 9.83.
All of which does, in fact, round to 9.8
On ISS it’s 8.722, but it’s constantly falling.
Everything experiences different gravity (and “apparent gravity”) in space. We should pass a treaty of using metric only there, if only to avoid losing more spacecraft.
The pedantry in this post is so dense you would need a torch to cut through it
What’s the variation? Does it ever get to 9.9 or 9.7? It’s a negligible “nope” for people weighing themselves :D
We are talking about engieneering use. Though good scales can be callibrated.
You can look up gravity survey maps but it’s not a huge variation in the habitable altitudes
We already have a permanently inhabited base outside Earth (ISS) with effectively zero gravity and there might be one on the Moon or Mars in 100 years. We should pass treaties to only use metric in space – a probe has been lost to unit confusion already.
This is dated 2007. Apparently NASA is already using metric:
I know, it has always used metric but the SW was by Lockheed Martin. Still, we need to convince potential extraterrestrial civilians.
We will convince them by force if necessary. They will adopt the Metric or get barred from entering the space bar
On ISS it’s ≈.89g, but agreed
I said “effectively zero gravity” for a reason – the term is “zero gravity” but I know it’s a misnomer.
Lb-Ft
Yeah but what about Cc-Bn?
(…coconuts-bananas you smucks!) /s
It’s understandable that you don’t understand a measurement system you’re not familiar with, but us imperials understand it just fine.
Sure. How much does water in a 1ft × 2ft × 3ft aquarium weigh?
In metric, an equivalent calculation is 30 cm × 60 cm × 90 cm = 3 × 6 × 9 dm^3 = 162 𝑙 ≡ 162 kg of water, and if you’re pedantic, the weight is around 1620 N or closer to 1590 N for 𝑔 = 9.8 m·s-2. All calculated in my head.
A cubic foot is 7.48 gallons, close enough to 7.5. 1 gallon of water is 8.33 lbs ≈ 25/3.
6 * 7.5 = 45 gallons
45 * 25/3 = 375 lbs – easy mental math. Sure, the “accurate” answer is 373.87 lbs, but the aquarium probably isn’t filled with distilled water, perfectly dimensionally accurate, or filled to that exact capacity.
A cubic foot is 7.48 gallons, close enough to 7.5
1 gallon of water is 8.33 lbs ≈ 25/3.
≈
25/3
Oh god this is what we mean
Oh just wait until you see imperial hex screws. In metric you get them in screwdriver size relating to mm. US hex screws are like 16/64 of an inch or 5/16 of an apple. And of course they don’t relate to metric at all and you can’t use the same tools.
Or fucking AWG. Higher number means smaller diameter wire, and Americans are afraid of decimal or negative numbers so large diameters are 00, 000 etc. The formula is batshit insane
so people just use a lookup table.Gauge is historically number of passes through gauging machine. With the machine and material in question being different for every single one. We took that and put it to a standard, so it’s super messy and makes no sense.
deleted by creator
It’s only arbitrarily easy since water has a density of 1 kg/l in metric, as it was designed to do so. If you happened to know the density of water is 62.2 lb/ft^3 then the equation is roughly 123*60 which is 360 lb. 372 if you can actually paid attention to what common core was trying to teach. If the material was anything other then water the math would be just as difficult to do in imperial or metric.
Metric is still far superior as the harmonized units make density in particular much easier to convert between. About the only thing imperial is better at is thread pitch of screws. I will also maintain that when describing human temperatures for weather Fahrenheit is a superior scale, but that’s just more personal preference and experience then any rational basis.
It’s only arbitrarily easy since water has a density of 1 kg/l in metric, as it was designed to do so.
it was designed to do so
That’s also what we mean
I will also maintain that when describing human temperatures for weather Fahrenheit is a superior scale
That’s one where I’d say it’s almost entirely personal preference. Water freezing being at zero is handy because it’s nice to know when there’s ice/snow outside, but that’s also something you could just learn to remember in Fahrenheit too. Doesn’t really matter with that system. Kelvin and Celsius being bros is nice but it’s extremely rare that I use that so eh.
deleted by creator
I wonder how many people know these numbers. With the level of US education, probably 10%. Not to mention, most quantities will not be exact feet, more like 2’5". Good luck multiplying that, at least 74 cm is easy to type into a calculator.
Anyway, if you ask a European how much a liter of water weighs, 95% will say “a kilo” without much hesitation.
Cope, seethe, mald.
I’m guessing those are some Imperial units too
As someone who’s all about science and all the things that use metric as it’s standard, I understand why us Americans argue for imperial measurements.
We know them.
I can general look at something and relatively tell how big it is based on my experience with the imperial system.
I’m not saying metric isn’t better but there’s also different languages with some of them being able to express certain emotions or features better than others. Yet you don’t see people demanding we all adapt a singular language.
People who grow up almost anywhere else on earth can also tell how big something is based on their experience with metric. That’s not something inherently based on the imperial system. The same way you go “oh that’s about 3 feet”, we go “oh that’s about 2 meters”.
And of course, switching systems overnight is insane, people are used to imperial, you’re right. But at the very least do what Britain did, and have both systems in parallel at the same time, everywhere. And in time, people would get used to metric too.
What I’ve noticed is that for those using other measurements, intuitively knowing about how long a meter is seems like witchcraft. But for use who are used to metric, it’s just “about this much 🫲🫱” or “about this much 🚶”.
We know them.
And you can’t learn new things?
They already said they’re American lol
We have to exist in a context that resists it. The weatherman will tell you the temperature in Fahrenheit. The road speed limit is listed in mph. You buy milk and gas in gallons.
If anything, Americans who force themselves to use metric in everyday use are working much harder at it than any European.
You should start by adopting metric in anything remotely scientific. Like
- voltage ✔️
- current ✔️
- power ❗ - horses are no longer really relevant, not to mention this - at least appliances use watts
- pressure ❌ - we got lucky that 10⁵ pascals is around 1 atmosphere so use
Paorbar, notmmHgorPSI- BTW,
PSIis a dumpster fire of an abbreviation, the correct one islbf/in²
- BTW,
- force ❌ - the
lb/lbfconfusion is not worth it when we have newtons - energy ❗ - joules and watt-hours are both fine, calories, electronvolts and TNT-tons less so, but don’t use
BTUwhich nobody can really comprehend, or gasoline-gallon-equivalents that nobody knows how to translate to anything else - gun caliber ✔️
- engine volume ☑ (it’s
cm³orml, notccFFS)- strange that motorcycle and gun enthusiasts are the few users of metric length & volume measurement in the US - too bad that these two measurements are never really used in calculations or conversion
- torque ❌ - this post says
Lb-Ftwhich is wrong on so many levels - data ✔️ - OK but data rates should be abbreviated
MB/sorkb/s, notkbps,Kb/s,kbit/sorMbit - wire diameter ❌❌ - holy shit, AWG is such a mess - larger wire is smaller number and the formula is so insane that people use lookup tables, also you’re afraid of decimal or negative numbers so large wires are 00, 000 etc.
Can you imagine having different units across the world for voltage or data? Like a 2¾-lemon battery or a 2 million floppy hard drive. That would be absolutely insane.
There is an awful lot of inconsistency in the imperial system too, like pound being abbreviated
lb,P(inPSI) or even£, or miles beingmiorMinMPHRecommended units for data have been mibibytes (MiB), gibibytes (GiB), etc. for a few years now
They’re more accurate because they use powers of two (actually 1024 instead of 1000)
“Accurate” is probably not the correct word anymore. It was when technical limitations dictated power-of-two capacities. Commodore 64 came out with 64 kiB = 216 B of memory, and FAT32 cannot handle file sizes ≥4 GiB (232 B). However, RAM/ROM/Flash chips manufacturers no longer make exclusively powers-of-two capacities, instead opting for (decinal) GB to save 7 % of the cost (and other fake capacity shenanigans). I prefer binary too but the two unit systems can coexist, people just need to label them correctly.
Ah I didn’t know that
About torque though: If my memory doesn’t betray me, one Newtonmeter is 100 grams hooked to a one meter long lever. Is that really different from one pound hanging off a one foot lever? I might be wrong, since I was born metric and have no clue in general.
That’s an approximate rule of thumb. The definition of a newton is the force required to accelerate 1 kg by 1 m/s². The ocean level gravity of earth just happens to be around 9.82 ≈ 10 m/s², thus a 100g weight feels approx 1N of gravitational force.
It’s 1 Newton at 1 meter.
As simple as 1 pound at 1 feet to be fair, the bad part is that pound is used as a measure of force as well as of mass. It works on the surface of the earth but not anywhere else.
Pounds are a measure of force, not mass. The imperial unit for mass is Slugs
I wonder what you’ll get when you ask for 0.02 slugs of ham at a butcher’s. Probably nothing but a horrified look.
Yes, but I mean everyone uses it as a measure of mass.
To be fair there exists a mass unit called pound mass, as opposed to pound force.
Gasoline gallon equivalents should die in a fire. It’s an invented statistic that’s meant to give you an idea of how much you’ll be spending to run an EV compared to an ICE car, but there’s so much slop in the numbers, and they can change over time.
Also, can we kill off hp for cars? Your EV’s battery will be rated in kwh. Your motor can be rated kw. These numbers work together and is exactly what the metric system is best at.
“we know them”
quick, how many barleycorns in a gunthers chain?
2367 I reckon.
What?
deleted
You can’t just commit war crimes because you’re on the Internet
Of course its an Oregon driver…
deleted by creator
Oh, they know exactly what they’re doing.
The entire karma train could ride in the eBussy’s marketing department.
And you know that eBussy can fit a lot in its marketing compartment
They renamed to XBUS years ago, exactly because of the memes.
Doesn’t need to go fast, but it will fucking go HARD.
Those cheeks were made for clappin’
And that’s just what they’ll do
These cheeks were made for clappin…
One of these days these cheeks are gonna… Clap all over dudes.
Gotta go Fast
truly, why else would they be so voluptuous
deleted by creator
Ah yes. The way-less-sexual-sounding “XBus” Solid rebrand. They should do the XTaxi next!
You guys are impossible to please. Fine! We’re going with our third option: BangBus.
!bus
Signed,
Dirty Mike and the Boyz
I’m gonna sit this one out and let them work out the kinks first. Maybe I’ll get the next model, the XXBus, or the one after that, the XXXBus.
I also heard about this whole social media thing called X!
It honestly does look pretty cool
It’s almost exactly what the wife and I want for a little ranch vehicle
Was gonna convert an old truck but this would work even better if it comes to the US (or I bother to import one I guess)
If someone suggests “the eBussy is bussin” as a sales pitch, they should probably be let go immediately.
edit: no, no promotions for that low hanging fruit, whomever came up with eBussy should be tried at the Hague.
Or promoted.
As the other commenter said, you mean promoted.
I heard of being horny on main, but this is ridiculous.
Alternative joke workshopping: being horny on mains (electricity)
How can you be in development/marketing and not google the term you are going to name a product beforehand?
VRChat femboys be like
⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡿⠿⠛⠛⠛⠛⠿⣿⣿⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡿⠛⠉⠁⠀⠀⠀⠀⠀⠀⠀⠉⠻⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡟⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠘⢿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⣿⡟⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣾⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⠋⠈⠀⠀⠀⠀⠐⠺⣖⢄⠀⠀⠀⠀⠀⠀⠀⠀⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⡏⢀⡆⠀⠀⠀⢋⣭⣽⡚⢮⣲⠆⠀⠀⠀⠀⠀⠀⢹⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⡇⡼⠀⠀⠀⠀⠈⠻⣅⣨⠇⠈⠀⠰⣀⣀⣀⡀⠀⢸⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⡇⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣟⢷⣶⠶⣃⢀⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⡅⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢿⠀⠈⠓⠚⢸⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠀⢀⡠⠀⡄⣀⠀⠀⠀⢻⠀⠀⠀⣠⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠐⠉⠀⠀⠙⠉⠀⠠⡶⣸⠁⠀⣠⣿⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣦⡆⠀⠐⠒⠢⢤⣀⡰⠁⠇⠈⠘⢶⣿⣿⣿⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠀⠠⣄⣉⣙⡉⠓⢀⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⣷⣄⠀⠀⠀⠀⠀⠀⠀⠀⣰⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿ ⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣤⣀⣀⠀⣀⣠⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿
Something something dragonsfuckingcars content
The eBussy would be Debussy’s favorite vehicle. And speaking of Debussy…
groceries.
